Irrigation Suppliers & Services: Find Parts, Equipment & Installers Near You
No one on staff knew what a pressure regulator was.
Where can you buy irrigation parts locally vs online?
But sometimes only a local supplier will do. Local stores let you hold the part before buying.
You can match threads and check fit. That saves returns and shipping delays. Local irrigation supply houses stock commercial-grade parts.
Big box stores carry only consumer brands. A local supply house has Rain Bird, Hunter, and Toro. Big box stores have off-brand kits.
Prices at local supply houses are often lower for the same quality. A Rain Bird 1800 series head costs $8 at a supply house. The same head at a big box is $12.
Online suppliers have better selection for specialty items. Drip tubing, brass fittings, and disc filters are cheaper online. A bundle of 100 1-GPH emitters costs $12 online.
25 each or more. Shipping adds $5 to $10. For large orders over $50, many online stores ship free.
Use local suppliers for PVC fittings and pipe. Use online stores for emitters, tubing, and filters. The mix saves me about 30% per project. support/drip-irrigation-components-emitters-regulators-filters-tubing/) to know exactly what parts you need before shopping.
How do you find a reliable irrigation installer?
The guy charged $800. The pipes froze in the first winter.
The valves leaked from day one. Finding a real irrigation pro takes more than a Google search. Start with the Irrigation Association (IA) website.
They list certified professionals by area. Certification means the installer passed a test on hydraulics, design, and local codes. Not every state licenses irrigators.
Texas, California, and Florida require licenses. Other states do not. A certified pro is safer than an unlicensed one.
Ask for three recent references. Call them. Ask about the installer’s punctuality, cleanup, and follow-up.
A good installer warranties their work for at least one year. A bad one disappears when problems arise. Check online reviews on Google and Yelp.
Look for consistent complaints. Late arrivals, poor communication, and leaky systems are red flags. 5-star rating are usually safe bets.
What questions should you ask before hiring an irrigation contractor?
Never again.
” Verify the license number. Ask for proof of general liability insurance. Without insurance, you are liable if a worker gets hurt.
A typical policy costs the contractor $500 to $1,500 per year. If they cannot show proof, walk away. ” Most pros warranty parts for one year. Labor warranties vary.
Some offer one year. Others offer five years. Get it in writing.
A verbal promise is worthless. ” If they say no, they are not up to code in most areas. New systems must have PRVs to prevent water hammer and pipe bursts. A contractor who skips this is cutting corners. ” A good installer measures static pressure and dynamic flow.
They should know each zone’s GPM capacity. The answer reveals their technical skill.
How much do irrigation professionals charge per hour?
The quotes ranged from $45 to $120 per hour. The cheapest guy had no insurance.
The most expensive had 20 years of experience. The price depends on location, complexity, and season. National averages range from $50 to $100 per hour.
Licensed pros in high-cost areas like California charge $75 to $120. Rural areas average $45 to $65. Service calls (a broken head or valve) cost a flat $75 to $150 minimum.
50 per square foot. A quarter-acre lawn costs $2,000 to $5,000. That includes design, trenching, pipe, heads, controller, and labor.
80 per square foot. A 1,000-square-foot garden costs $300 to $800. Always get three written quotes.
Compare line items, not just totals. A $4,000 quote with high-end components beats a $3,000 quote with cheap parts. The cheap system will fail in two years.
com/cost/landscaping/install-an-irrigation-system/) Practical guidance: